Network switches interconnecting links discovery
By default Switch Center is mapping all discovered switches to each other by settings each switch uplink and downlinks using its built-in interconnecting links mapping algorithm. The entire map layout can be seen by using the Network Views screen using Switch Center hyperbolic map which provides Find, Trace and View options. There are some cases that specific mapping is needed to direct Switch Center to use permanent interconnecting links between specific switches.
These are the required settings to enable permanent switches interconnecting links:
1. From the main menu select the Options >> Settings screen and click on the Switches icon.
2. From the Discovery Options section, enable permanent switches connections and click over it.
3. Select the preferred switches display by using Name, IP or MAC address.
4. Use the Add button to select specific switch and uplink/downlink ports.
5. Click the OK button after setting the preferred connections.
6. Click the Save button on the bottom of the screen.
These are the required settings to enable permanent switches interconnecting links:
1. From the main menu select the Options >> Settings screen and click on the Switches icon.
2. From the Discovery Options section, enable permanent switches connections and click over it.
3. Select the preferred switches display by using Name, IP or MAC address.
4. Use the Add button to select specific switch and uplink/downlink ports.
5. Click the OK button after setting the preferred connections.
6. Click the Save button on the bottom of the screen.
Labels: Topics
XML RSS
0 Comments:
Post a Comment
<< Home